When it comes to the best products for soundproofing a car, the brands like Noic0, SoundSkins, Hushmat, FatMat, and Dynamat are part of the discussion. There are so many brands, but which one is best for the job. Here we are going to talk about only Dynamat and FatMat and examine them in detail. In this FatMat vs Dynamat comparison; we will find out which one is better.
Both brands offer some of the best products for reducing the noise from the road. These products also absorb the echo to make it possible for you to have better music experience on drive. We will compare both of them on various factors, including effectiveness and price. After the comparison, you would be able to choose a better sound deadener for your car.
We will be comparing both of them on the following points.
- Ease of Installation
Table of Contents
Why Soundproof Your Car?
If you aren’t sure what’s the hype about the car soundproofing. Or if you read about these materials being discussed on a car forum and you are just checking what’s these materials are about. This is the place where all of the questions will be answered.
There are several reasons for using these noise-reducing mats in your vehicle. It is commonly used for improving the acoustics of your car. If you love listening to music during a drive, then after the installation of any of these products, you will be able to enjoy your music on a different level.
If you are annoyed by all the noise on the road, again using one of the soundproofing material is the solution to your problem. These products act as a sound absorber and this helps in cutting down the noise from the road and by dampening the echoes they improve the music experience in the car.
Overview of Dynamat
Dynamat’s presence in the market dates back to 1986. Its three-plus decade presence is a testament to its performance. Due to the high-quality products offered, it maintains a dominant share in the industry. It is superb at absorbing the noise from outside. Dynamat has a vast range of products, and Dynamat Xtreme is one of the best sound deadener available in the market. Its 50-60 mills thick materials can dampen the sound by 9 to 12 dB. You can check out the reviews on Amazon here.
It is an aluminum-coated deadener which makes it a good heat resistor. You also don’t have to worry about it producing any unpleasant smell during summer.
It is costlier than other brands, but the performance is worth the price. If you decide to choose Dynamat for soundproofing, I would advise you to start with the doors and then go for the hood, floors, headliner, and trunk. Some of the kits offered by Dynamat are listed below.
- Xtreme Door Kit 12″ x 36″ x 0.067″ – Set of 4
- Dynamat Hoodliner 32″ x 54″ x 3/4″
- Xtreme Trunk Kit 18″ x 32″ 20 sq.ft. – Set of 5
- Dynamat Xtreme Mega Pack 72 sq.ft 48″ x 24″ – Set of 9
- Dynamat Xtreme Bulk Pack 18″ x 32″ x 0.067″ – Set of 9
Overview of FatMat
FatMat is another quality brand with thousands of users. It is one of the main competitors of Dynamat. FatMat deadener is 50 mills thick, which is enough to dampen most of the noise and reduce echo. It is a little bit easier to install as compared to Dynamat but will still need some tutorials and manuals.
FatMat is asphalt-based, which helps it isolate the noise. But this material does have its drawbacks. When installed, it gives a strong smell, which can last for several days. It also has trouble during summer in high-temperature areas. So, if you live in a county where temperatures go to 100 ºF, then it isn’t for you.
You can apply FatMat sound deadener bulk kit on doors, floors, and trunk.
FatMat vs Dynamat
Both the products offer some kind of features that others lack. In some cases, one takes a lead while in other the second is ahead. Here we are going to compare both of them on various factors and decide a winner.
Due to its thickness, Dynamat deadens noise significantly. The material used in Dynamat can withstand heat up to 240 ºF. Which makes it the right choice even in very hot counties. It effectively reduces road noise by 9-12 dB.
FatMat is also capable of decreasing sound significantly. Its asphalt-based structures help in absorbing noise from the road. But when compared to Dynamat it is less effective as it is thinner. It also has trouble in hot areas, where it produces a strong smell.
Here Dynamat has a clear advantage. If you want the most effective material for deadening the noise, then with Dynamat.
Ease Of Installation
It is another factor you should consider while selecting one of the brands. Dynamat is not easy to install for beginners. Its thickness makes even cutting the material a headache. So, if you haven’t installed any auto sound dampener before than you would probably need to hire a professional to fit it.
FatMat isn’t easy to install either. But due to it being thinner than the Dynanamt, you would be able to cut it with relative ease. You will need to use a manual and a few online tutorials to figure it out. But you can install it without hiring anyone.
FatMat is slightly easier to install than the Dynamat. So, this round goes to FatMat.
FatMat is explicitly made for the automotive industry. It doesn’t have any noticeable use outside soundproofing the vehicles.
Dynamat, on the other hand, has extensive usage from automotive to maximizing the performance of home audio. Many industries use their products to deaden the noise. Some yachts and motorboats use it to reduce sound from the engine room. Due to its vast product range, it has far more usage than the FatMat.
Dynamat wins here due to its usage in more industries. But if you are focusing on dampening the noise within your car, this factor is irrelevant.
Thickness Of Material
Thickness is a crucial factor when it comes to soundproofing. If the material is thin, it won’t be able to absorb the noise.
Dynamat is around 60 mills thick while FatMat is around 50 mills in thickness. Even though both are capable of sound deadening, the aforementioned does a better job at dampening any noise from the road and reducing echo.
FatMat fails to match the level of Dynamat when it comes to dampening the sound. This round goes to Dynamat.
Price is a major factor for people looking to soundproof their vehicles within a small budget. So, this may be a deciding point for many people looking for a good auto sound deadener.
Dynamat costs around $4-5 per sq.ft., it is expensive than any other brand available in the market, but the performance is worth the price. FatMat is cheaper than Dynamat. It is priced at $2.2-2.5 per sq.ft. If you are soundproofing a truck, this difference becomes even more prominent. While FatMat is cheaper than the Dynamat is still expensive than the other brands.
When it comes to price, FatMat is going to save you some bucks. So, if you are tight on budget and want to achieve decent soundproofing within the resources, FatMat will be the best choice.
Dynamat is a better sound deadener overall. It is more effective in reducing noise, and it uses better material. It doesn’t leave an odor after installation and can withstand heat. But when it comes to ease of installation and price, it falls behind FatMat. You should factor out all the points and then make a decision based on your requirements and budget. If you don’t want to spend a lot or hire someone to install the product, go for FatMat otherwise Dynamat is a better choice in every department.